ITV163 FAQ

Possible Causes:

• Batteries are not installed or are installed incorrectly

• Batteries are depleted

• Poor contact in the battery compartment (e.g., loose or oxidized battery springs)

Solutions:

1. Replace with fresh batteries — Use 3 new AAA batteries and confirm correct polarity (+/-)

2. Clean battery contacts — Wipe the battery contacts and springs with a dry cloth or alcohol swab. Make sure the springs have proper tension

3. Secure the battery cover — Ensure the battery compartment cover and sealing parts are fully pressed into place

Possible Causes:

• Mixed use of new and old batteries

• Low‑quality batteries

• Frequent manual operation or long watering cycles

Solutions:

• Always use new alkaline batteries of the same brand and type

• Avoid mixing old and new batteries

• For best performance, replace all batteries at the same time

Possible Causes:

• The water source valve is not open

• The water level in the bucket/barrel is too low, or the bucket/barrel is empty

• The filter or dripper is clogged

Solutions:

1. Check water supply — Make sure the water source is fully open

2. Check water level — Ensure the bucket/barrel has enough water, and the outlet is not blocked by the barrel wall or sediment

3. Add water — Refill the bucket/barrel to the required level

4. Clean the filter — Remove and rinse the filter to clear any debris